3V Non Rechargeable Lithium Batteries CR14250SC No Passivation Effect For IoT Sensors

Super capacity Non Rechargeable 3V Lithium Primary Battery CR14250SC For IoT Sensors

High Voltage
• Nominal voltage up to 3.0 V

High Energy Density
• Specific energy density up to 260 Wh/kg

Wide Operating Temperature Range
• -40°C to +85°C

Long Shelf Life
• Self discharge rate is less than 2% per year at room temperature
• High capacity, stable performance, no passivation effect
• Glass-to-metal seal
• Bobbin and spiral structure is available for different applications

2. CR14250SC Characteristics (23±2oC, in 1 year)

• Open Circuit Voltage ≥3.1V
• Nominal Capacity 1050mAh
• Maximum Continuous Current 20mA
• Battery discharged for minimum 50% of rated capacity
• Maximum Pulse Discharge Current 100mA
• Battery discharged for minimum 50% of rated capacity
• with max pulse for 3 seconds after 27 seconds break
• Storage Condition Temperature ≤ 30℃
• Humidity ≤ 75%RH
• Operating Temperature - 40~+85℃
• Self-discharge Rate ≤2%

3. Characteristics

In case of Exia II CT6, batteries can withstand the toughest short-circuit test (without external protection measures) with surface temperature not higher than 85℃.

4.Bobbin Benefits

• Excellent safety record, high capacity
• Typical Applications
• Low power consumption & long shelf life equipment,
• like calculator, industrial PC CMOS, memory support power, etc.

5. Company Advantages

• Quality management system of HCB is conformity with GB/T19001-2008/ISO9001:2008 standard;
• HCB Environment Management System meets the standard GB/T24001-2004/ISO14001:2004;
• The battery can pass drop test if you need;
• Report for safe transport of goods can be provided with you if needed;
• We can provide you with the CE certificate if you need;
• Rosh Standard is workable for HCB Battery;
• UL Standard is workable for HCB Battery.

6. Warning

• Do not charge. When this battery is charged, gas is generated inside and raises internal pressure, resulting in fire, heat generation, leakage or bursting.
• Do not dispose of in fire, disassemble or heat in any way. It will damage the insulation materials and the safety vent resulting in fire, heat generation, leakage or bursting.
• Insert batteries properly. Keep polarities in the correct position aligning + and - correctly for ALL batteries to avoid leakage or bursting.
• Do not short-circuit. If the + and - come into contact with metal objects, short circuiting occurs resulting in heat generation or bursting. When carrying or storing batteries, avoid direct contact with metal objects such as bracelets or key chains by putting them in a separate bag.

primary lithium battery

lithium primary cells

lithium primary battery

3V Non Rechargeable Lithium Batteries CR14250SC No Passivation Effect For IoT Sensors Images